TD Belt Conveyor

TD Belt Conveyor TD Belt Conveyor is composed of the running part (hopper with traction tape), with the upper section of drive rollers, tension rollers with the lower part of section, intermediate casing, drives, reverse brake rigging, etc. It is suitable for transport bulk density p <1.5m3 powder, granular and small particle bulk materials upward, such as coal, sand, coke at the end, cement, broken ore. The machine is characterized by rapid centrifugal discharge: and use the rubber conveyor belt as traction members.So it is not suitable for the block and resistance of materials. The temperature of transported material must not exceed 600C, such as when using heat-resistant rubber is no more than 2000C. The elevator has the following characteristics: 1, transport capacity is double than D-type. 2, traction parts are made of high strength rubber conveyor belt with high tensile strength, long service life. 3, the whole structure is simple, easy to install, easy to adjust, repair and maintenance. 4, pulling pieces of high-strength is low-alloy Ring chain, after appropriating heat treatment, it has high tensile strength and abrasion resistance, long service life. Belt widthPowerIdler formtrough idlerflat idler(mm)(kw)Belt speed(m/s)0.811.251.622.53.1540.811.251.622.55001.5-30maximum transportation capacity7897122156191232415266841031256501.5-4013116420626432339167881101421742118002.2-7521834844554666182411814718423628935010003-1004355446968531033123323028836845154612004-1856558191048128415561858220234543255367782114004-1858911115142717482118252829964695887539221117